Flexographic printing forms – made by ContiTech.
The printing plate for finest structures in tubes, cups and cans applications. Suitable for water-, solvent-based and UV curing ink systems
Advantages of the product
- Dimensional stability
- High-resolution in engraving (up to 5,080 dpi)
- Consistent print
- Less plate swelling
- Long service-life
- Improved ink laydown
Guiding Value |
|
|
Standard |
Cover Coating: |
EPDM compound |
|
Color: |
black |
|
Surface Finish: |
fineground |
|
Hardness of cover compound (Nominal Shore A): |
65
| DIN ISO 48-4*/**
|
Carrier (Nominal Thickness): |
Steel-Sheet magnetic (0.2 mm) |
|
Product options (Nominal Thickness): |
0.73 mm | 0.83 mm | 0.95 mm |
|
max. Engraving depth: |
0.4 mm | 0.5 mm | 0.6 mm |
|
* Performed in accordance with the given standard. Please note that the number of samples tested may differ.
** The specified hardness of the cover compound can only be measured using test samples according to the standard. It is not possible to measure the hardness directly on the product itself.